+62 (061) 88809911 (Hunting)
medan@victorindogroup.com
Product Detail Information
Heater & Coil
Others - Air Fan
Heater & Coil
PT Victorindo's commitment to customer needs is reflected in its international network. They provide expertise in selection, installation, startup, operation, and service. Heater and Coil Pump products are supported by reliable technicians in their manufacture. The points of excellence are as follows.

Coupling is a transfer of energy that occurs in the space between the heating part of the coil and the workpiece. So, coupling distance is how much space is needed to balance efficiency and manufacturing requirements.

The size of this product in general, the distance increases with the section diameter, the typical values ​​are 0.75, 1.25, and 1.75 inches (19, 32 and 44 mm) or stock-billet diameters of about 1.5, 4 and 6 inches (38, 102, and 152 mm), respectively.

When the length of the coil exceeds 4-8x its diameter, uniform heating at high power densities becomes difficult. In this case, a single or multi-turn turning coil scanning the length of the workpiece is often preferred. static surface heating, in which parts can be rotated but not moved through the coil, a coupling distance of 0.060 inch (0.15 cm) from section to coil is recommended.

For heating or progressive scanning, a coupling distance of 0.075 inch (0.19 cm) is usually required to allow for variation in workpiece alignment.

A coil with smooth turns and multiple turns closely combined with the workpiece develops a very uniform heating pattern.

The same uniformity can be achieved by opening the coupling between the part and the coil so that the magnetic flux pattern cutting across the heated area is more uniform. However, it also reduces energy transfer.

Where a low heating rate is required, as in heating for forging, this is acceptable. When a high heating rate is required, it is best to keep the clutch close. The pitch of the coil must be opened to prevent generator overload.

Apart from the advantages in terms of performance there is also a stable advantage of the pump and hence sucks the inlet fluid effectively. This type is designed for high efficiency because it naturally expels air from the flow pipe, and reduces the need for the user to manually expel the air.

This Heater and Coil Pump has a flow power of around 100 m3 / hour. The manufacture of this pump is made with a cast iron process, there is a lip seal and a mechanical seal to minimize the leakage rate. Specialized metal to support pressure resistance up to 14 bar and resistance to temperatures of -30 to 350oC.

PT Victorindo can be an option for you, because we provide pumps, gear pumps, valves, and so on with original and number one quality goods. You can contact directly to the distributor of PT Victorindo. We work directly with companies that produce industrial pumps and pump spare parts. To maintain the level of customer satisfaction. You don't need to worry if there is trouble with these tools in the future because we also prepare reliable technicians to service or repair these tools. Our company has a principle, serve quickly.

For further information, please contact the contact below:

PT. Victorindo Pratama Mandiri
Jl. P. Bunaken A3
Medan III Industrial Estate (KIM 3)
Medan, North Sumatra - Indonesia

Phone: +62 618 8809 911
LinkedIn: @victorindogroup
E-mail. medan@victorindogroup.com
LATEST NEWS
26 Okt 2020
Everyone agrees that reactive maintenance is probably the worst pump reliability strategy. Maintaining equipment only ...
09 Okt 2020
Thanks to one of our valuable customer for believing us in every pumps solutions.
Head Office
Jl. P. Bunaken A3
Kawasan Industri Medan III (KIM 3)
Medan, North Sumatra - Indonesia
Phone. +62 (061) 88809911 (Hunting)
Fax. +62 (061) 88809996
E-mail. medan@victorindogroup.com
 
WhatsApp
06188809911  Admin