+62 (061) 88809911 (Hunting)
medan@victorindogroup.com
Product Detail Information
Etanorm SYA
KSB - Centrifugal Pump End Suction
Etanorm SYA
Etanorm SYA is a centrifugal pump used in the transfer of hot water circulation systems. Etanorm SYA has a horizontal volute casing with main dimensions reaching EN 733 to DN 200. This centrifugal pump can move thermal oil up to 350 ° C and move hot water up to 180 ° C. This single-stage pump has a bracket bearing that can be pulled out. With a cover that can be replaced with a serviceable ring. One of the uses of Etanorm SYA is in the thermal oil industry.

Various accessories that exist in Etanorm SYA, one of the most interesting is the temperature sensor, where this pump can detect the temperature of hot water with actual. This centrifugal pump uses steel plates that are heat-resistant and not easily damaged or corroded. The steel section of the pump is welded with a torque resistant design.

The clutch on this pump is very flexible with two choices without spacer arms or with spacer arms. Etanorm SYA has 3 different sizes with diameters between 100mm-166mm. The impeller is optimized with a hydraulic system, so it is very efficient in its use. The Etanorm SYA Pump is a back pull-out design that is easily tuned in and out so it is easy to disassemble the engine when it wants to be serviced.

Etanorm SYA is a product of KSB which is equipped with carbon bearings and has high operating power. In addition, this pump is equipped with a pressure boundary that is designed for 16 bars and is made of ductile iron which is rich in graphite so it is resistant to high heat. In conclusion, the Etanorm SYA centrifugal pump has the following specifications and bearings:
  • Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, with bearing bracket, in back pull-out design.
  • Volute casing and impeller with replaceable wear rings.
  • Volute casing with integrally cast pump feet.
Bearings
  • Coupling side: grease-lubricated deep-groove ball.
If you want to find KSB products, you can contact directly to the distributor PT Victorindo. Our company is a distributor of KSB products with high quality goods, one of which is Etanorm SYA. You do not need to worry if there are problems with these tools in the future because we also prepare reliable technicians to service or repair the equipment.

For further information, please contact the contact below:

Phone: +62 618 8809 911
LinkedIn: @victorindogroup
LATEST NEWS
09 Okt 2020
Thanks to one of our valuable customer for believing us in every pumps solutions.
Head Office
Jl. P. Bunaken A3
Kawasan Industri Medan III (KIM 3)
Medan, North Sumatra - Indonesia
Phone. +62 (061) 88809911 (Hunting)
Fax. +62 (061) 88809996
E-mail. medan@victorindogroup.com
 
WhatsApp
06188809911  Admin