+62 (061) 88809911 (Hunting)
Gear Flex
Gear Flex
Others - Gear Box
Gear Flex
Well-known distributors such as PT Victorindo always develop their business and expand their supplier and client networks. PT Victorindo is a large distributor that provides various types of pumps, spare parts (gear pumps, boilers, lubricants, and others), valves (palm oil mill valves, steam valves, and various valves for the palm oil industry). Various pumps at our distributor are number one quality.

Technically Gear Flex, the floating shaft can eliminate the need for additional bearing support along the spanning of the shaft because the shaft is supported at the end by equipment connected via a half flexible coupling. It is generally used for cooling tower fan applications. Mounting the flexible hub on the floating shaft allows easier replacement in the event of wear and allows a rigid hub with increased bore capacity to be used on the connected equipment shaft. This often means a smaller clutch size is taken advantage of. When the rigid hub is on the floating shaft, a shorter span of the shaft can be accommodated. Due to the outboard flexible hub, the gear mesh area is further apart, providing greater misalignment capacity.


To coat the clutch casing and center of the clutch with the specified lubricant until the gear is immersed in oil, assemble the clutch, tighten the bolts and then supplement the oil through the oil plug hole using an oil gun and so on. Changing the lubricant timing is the same as the gear wheel oil, but replace the old lubricant with a new lubricant completely by overhauling the clutch.

API 671 REQUIREMENTS on the Gear Flex

Double bond type doubling. Material of construction - Alloy Steel EN-19. ISO-1940 component balancing. Unless otherwise specified, the joint assembly shall allow a total axial displacement of at least 1/4 "(6.4 mm). Antifly Spacer Design. The clutch design shall ensure that all components are centered positively. The gear mesh shall be centered on the external tooth crown diameter and diameter. hilt internal gear The shape of the involute gear must be used at the discretion of the vendor The outer gear must be relieved or chamfered at the ends and ends to provide the required misalignment capability and torsional capacity Gear hardness must be at least 45 Rc. sleeve) must be greater than or equal to the hardness of the gear coupling.

This type of pump meets aseptic and hygienic specifications with high reliability and efficiency. Thanks to mechanical diaphragm actuation, it is impossible for hydraulic oil to be contaminated by the pumping fluid. This pump applies a flow rate of 100 liters / hour per pump head and a maximum pressure of 14 bar.

In the palm oil industry, the pump is a component that has a very important role in the running process of an industry, for example for fast flow purposes, filling reservoirs, and waste disposal.

Gear Flex products from distributor PT Victorindo are highly recommended for you, because the pumps in our place are genuine and well tested. For reservations you can contact directly to the distributor of PT Victorindo. We work directly with companies that produce number one quality pumps. To maintain the level of customer satisfaction. You don't need to worry if there is trouble with these tools in the future because we also prepare reliable technicians to service or repair these tools. Our company has a principle, serve quickly.

For further information, please contact the contact below:

PT. Victorindo Pratama Mandiri
Jl. P. Bunaken A3
Medan III Industrial Estate (KIM 3)
Medan, North Sumatra - Indonesia

Phone: +62 618 8809 911
LinkedIn: @victorindogroup
E-mail. medan@victorindogroup.com
Head Office
Office PT Victorindo Pratama Mandiri:
Jl. P. Bunaken A3
Kawasan Industri Medan III (KIM 3)
Medan, North Sumatra - Indonesia

Call Center PT Victorindo Pratama Mandiri:
Phone. +62 (061) 88809911 (Hunting)
Fax. +62 (061) 88809996
E-mail. medan@victorindogroup.com
06188809911  Admin