+62 (061) 88809911 (Hunting)
Cone Ring
Cone Ring
Others - Gear Box
Cone Ring
The development of the pump industry is increasingly advanced, this makes PT Victorindo always develop its business and expand its supplier and client network. PT Victorindo is a large distributor that provides various types of pumps, spare parts (gear pumps, boilers, lubricants, and others), valves (palm oil mill valves, steam valves, and various valves for the palm oil industry). Cone Ring products at our distributor are number one quality.

Cone Ring Application for:

If we are going to supply bored coupling hubs for Taper-Lock bushings, the bushing manufacturer MUST be noted on the order. Consult our Application Engineer when a limited end float is required. -Refer to our Application Engineer for bored constraints on hubs requiring a Pull-out Bolt hole. Reference Notes

The peak torque capacity is double the published rating. Consult our Application Engineer for even higher speeds. Maximum drill bit is reduced for hubs equipped with an interverent fit and setscrew over the keyway. The recommended wrench sizes for the listed maximum drill bits are shown in the respective coupling type sections.

The minimum hole is the smallest hole in which an RSB hub can be boring. Depends on the clutch. rugged drill hubs may only have blind centering holes or through holes which will allow rework of machining from the hub to a specified minimum hole.

Size 5R - 50R Nylon cover comes standard steel cover and Epoxy which is available upon request. For 60R Size - 80R Epoxy coated steel covers are standard (Nylon covers are not available) Fasteners are ISO 7380 Socket Button Head Capscrews. Two closure fasteners per clutch. To get total weight: Base Coupling + BE times kg per mm BE. To get total WR2 Base coupling + BE times WR2 per mm from BE.

The value shown is based on no angular misalignment. The axial centering force limits the motor end float and satisfies the requirements of the NEMA MG1 standard. Interpolation for medium speed. Maximum BE is based on 70% of critical speed and for higher running speeds.

Another advantage of this pump is that the high speed operation of the rotor positions can be adjusted allowing for optimal clearance and tip efficiency. This pump provides more performance from a smaller package at a lower total installed cost. The speed reducer, and the cost, is often omitted.

This product can achieve a flow rate of about 100 liters / hour per pump head. Using the pump head, the discharge pressure is up to 14 bar. This special metal is to support resistance to pressure and resistance to temperatures up to 150oC.

In the palm oil industry, the pump is a component that has a very important role in the running process of an industry, for example for fast flow purposes, filling reservoirs, and waste disposal.

The Cone Ring type pump from the distributor PT Victorindo is highly recommended for you, because the pumps in our place are genuine and well tested. For reservations you can contact directly to the distributor of PT Victorindo. We work directly with companies that produce number one quality pumps. To maintain the level of customer satisfaction. You don't need to worry if there is trouble with these tools in the future because we also prepare reliable technicians to service or repair these tools.

For further information, please contact the contact below:

PT. Victorindo Pratama Mandiri
Jl. P. Bunaken A3
Medan III Industrial Estate (KIM 3)
Medan, North Sumatra - Indonesia

Phone: +62 618 8809 911
LinkedIn: @victorindogroup
E-mail. medan@victorindogroup.com
Head Office
Office PT Victorindo Pratama Mandiri:
Jl. P. Bunaken A3
Kawasan Industri Medan III (KIM 3)
Medan, North Sumatra - Indonesia

Call Center PT Victorindo Pratama Mandiri:
Phone. +62 (061) 88809911 (Hunting)
Fax. +62 (061) 88809996
E-mail. medan@victorindogroup.com
06188809911  Admin